【🎁Limit Discounts】Methtltdown Mothtgul Ice Press - The Finthtest Clear Ice Press in the World

We ship directly from the manufacturer, there are no distributors, and the prices are low.
Full refund within 30 days without cause.
5-year warranty on all machines

The ultimate way to make dilution-reducing ice balls for all of your favorite beverages.

- Weight 16(lbs) – 4.19″(l) x 4.19″(w) x 8″ (h)
- Constructed of highly conductive 99.8% solid copper
- Pinless HoverCover design for smooth operation
- TrickleDown grooves visibly guide meltwater
- Molded non-slip rubber feet
- 1 Vamoose Clear Ice Device (included)
- 1 Stainless Steel Tongs (included)

To use Meltdown, simply slide the top off, place the ice cylinder within, and replace the cover. Due to the weight and conduction of the solid copper design, Meltdown begins the ice ball-making process immediately.
As Meltdown forms an ice ball, meltwater is channeled down the sides of the device along four cascading grooves designed into the sidewall.
In one minute (assuming the device is room temperature), you’ll have a pure and beautiful ice sphere that’s ready for your cocktail.

The runoff water is captured in Meltown’s CatchAll™ Base, so you can pour it away before making another ice ball.
Because copper retains cold temperatures, you should run it under warm water or allow it to warm on its own prior to making additional ice balls.

Solid Copper Construction – Pinless Design
Most ice ball presses use pins that guide the cover down the press, but pins present two potential flaws: First, pins can cause “chattering” since ice does not melt uniformly. So, as the top of the press descends, if the pins are not perfectly aligned, they catch on the top of the press. Secondly, if that ice ball press is dropped, the pins are weakened and can also be damaged.
Meltdown features a pinless design with the cover riding in grooves engineered into the base. Our design features three pieces of solid copper with self-guiding grooves assuring alignment to protect your investment.
Cleaning Instructions

DISASSEMBLY INSTRUCTIONS
Step 1 Separate your Meltdown. Place the HoverCover top section as shown. Place the CatchAll™ Base bottom section upside down on a soft towel.
Step 2 Using a 7/64” hex wrench, remove all three (3) center bolts holding the CatchAll™ Base to the Middle Section. With bolts removed, carefully separate sections and place them on a soft towel for cleaning.

CLEAN & RINSE
Step 3 Thoroughly wet the non-scratch sponge (we recommend Scotch Brite Dobie Non-Scratching Cleaning Pads) and Meltdown piece to be cleaned. Place cleanser (Wrights or Chore Girl copper cleaner) on damp sponge and use to clean each piece of your Meltdown.
Using minimal force, scrub around each piece of your Meltdown for 30-40 seconds or until tarnish is removed.
Thoroughly rinse each piece after cleaning. Re-apply cleanser to the sponge as you start to clean each piece of your Meltdown.
Cleaning note- For best results, follow the round contour of the Meltdown pieces when scrubbing with sponge.

FINAL POLISH & ASSEMBLE
Step 4 After cleaning and rinsing are completed, use a soft towel to dry and polish each piece of your Meltdown.
Step 5 Carefully place CatchAll™ Base bottom section back on Middle Section and add three (3) bolts to holes for re-assembly.
Assembly note Make sure the trickledown groove is centered with the Meltdown logo before tightening bolts in place. Be careful not to overtighten bolts.
Step 6 Place HoverCover™ top section back on assembled CatchAll™ Base bottom section and enjoy your next drink with the Meltdown Ice Ball Press.

Frequently Asked Questions
What size ice balls does the Meltdown Mogul make?
The press makes 2.5 inch diameter ice spheres
How often do I need to clean my Meltdown ice ball press?
It is a matter of preference. Copper will tarnish over time when exposed to oxygen and humid air. Many owners of the Meltdown prefer the authentic tarnished look that comes with age. When you want to restore the shine to new, simply follow the cleaning instructions on this site.
How do I make consecutive ice balls on the Meltdown ice ball press?
The Meltdown works best when it is at room temperature. When making consecutive ice balls, simply run the entire Meltdown press under warm water for 15-30 seconds. You are now ready to make your next ice ball.
Can I make multiple Meltdown ice balls ahead of an event?
Yes, you can pre-make and freeze ice balls from your Meltdown ice ball press, so they’re ready whenever you need them.
What makes the Meltdown better than other ice presses?
Made from 99.8% solid copper, American-made Meltdown makes exquisite ice balls. Copper is 1.7 times more conductive than aluminum and three times heavier, so when you use Meltdown, the extreme conductivity and weight of the solid copper press effortlessly melts and molds the ice. The pinless design means there’s nothing to break.
Do you recommend distilled water or another type of water?
Distilled and “purified “ water (produced through reverse osmosis) can actually deliver substandard results. Our recommendation is to try using your tap water first. If that doesn’t create the clarity or taste you desire, we suggest bottled spring water, available at most grocery and convenience stores.

OUR GUARANTEE
We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly.



OUR GUARANTEE
Insured Worldwide Shipping: Each order includes real-time tracking details and insurance coverage in the unlikely event that a package gets lost or stolen in transit.
Money Back Guarantee: If your items arrive damaged or becomes defective within 30 days of normal usage, we will gladly issue out a replacement or refund.
Safe & Secure Checkouts: We use state-of-the-art SSL Secure encryption to keep your personal and financial information 100% protected.
